Micrometers are the basic engineer's measuring instrument (analogue or digital). They can be supplied with special anvils, such as flat, spherical, spline, disk, blade, point, and knife-edge. Also sets of micrometers with interchangeable anvils to measure a large range of diameters.
Micrometers
Mahr Micromar 40 A Micrometer 0-25mm, 25-50mm
£59.00
Please select micrometer size above: DIN 863-1 Measuring range mm: 0 - 25 mm, 25-50mm Graduation value mm: 0.01 Package contains: setting standard (measuring range of 25-50 mm), instruction manual, case Operating and display units with satin chrome finish Hard lacquered steel frame Spindle and anvil made of hardened steel, carbide-tipped Hea...
Mahr Micromar 40 ER IP40 Micrometer 0-25mm/0-1"
£174.00
High contrast digit display Stainless spindle is hardened throughout and ground Spindle and anvil are carbide-tipped Rapid drive Ratchet is integrated in the thimble Lacquered steel frame, heat insulated Standard Factory standard Measuring range mm 0 - 25 Measuring range inch 0 - 1" Material Contact surface carbide Resolution mm/inc...
Mahr Micromar 40 EWR IP65 Micrometer: 0-25mm, 25-50mm
£219.00
High contrast digit display Stainless spindle is hardened throughout and ground Spindle and anvil are carbide-tipped Rapid drive Ratchet is integrated in the thimble Lacquered steel frame, heat insulated 0-25mm/0-1": Standard Factory standard Measuring range mm 0 - 25 Measuring range inch 0 - 1" Material Contact surface carbide Reso...
Mahr Micromar 40 EWRi IP65 Wireless Micrometer 0-25mm/0-1"
£309.00
High contrast digit display Stainless spindle is hardened throughout and ground Spindle and anvil are carbide-tipped Rapid drive Ratchet is integrated in the thimble Lacquered steel frame, heat insulated Standard Factory standard Measuring range mm 0 - 25 Measuring range inch 0 - 1" Material Contact surface carbide Resolution mm/inc...
Mahr Micromar 40 EWRi-L IP65 Wireless Digital Micrometer 0-25mm/0-1"
£386.00
Avoiding workpiece damage: The non-rotating spindle has a touching touch, which prevents scratch marks on sensitive and finely machined surfaces Ideal for measuring thin metal foils without twisting and bending them Thread flank measurement by using thread wires: Both wire holders always remain in the engaged position with the non-rotating spi...
Mahr Micromar 40 SA Micrometer Set 0-100mm
£347.00
Operating and display units with satin chrome finish Hard lacquered steel frame Spindle and anvil made of hardened steel, carbide-tipped Heat insulators Rapid drive with integrated ratchet Locking device Standard DIN 863-1 Measuring range mm 0 - 100 Graduation value mm 0,01 Spindle diameter 6.5 mm Spindle thread pitch_mm 0.5 mm
Bowers DigiMic - Digital External Micrometer 0-25mm
£375.72
Making External Measurement Quick and EasyBowers Group has extended its own manufactured core product range with the introduction of DigiMic, the Bowers digital micrometer. This device boasts an impressive accuracy of 2 μm max permissible error and 2 μm max error range. Ergonomically designed to fit comfortably in the hand, the DigiMic is an exc...
DM1025 Digital Micrometer 0-25mm (0-1″)
£39.00
Features: Range: 0 – 25mm (1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.002mm (0.0001″) Ratchet drive Locking screw Incremental or absolute measurements mm-inch conversion Zero at any point Carbide measuring faces Power: 3V CR1632 Battery (Included) MPN: DM1025 Brand: DML
DM4025P Point Micrometer 0-25mm (0.1″)
£109.00
Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.006mm (0.0003″) 30˚ pointed anvils 0.3mm point radius IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Locking screw Zero at any point mm-inch conversion Hardened stainless steel spindle Incremental...
DM4025PAD Disc Micrometer 0-25mm (0.1″)
£135.00
Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.004mm (0.0002″) Anvil Diameter: 20mm Non-rotating spindle IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Zero at any point mm-inch conversion Chrome plated Frame Hardened stainless steel spindle I...
DM4025SA Multi Anvil Uni Micrometer 0-25mm (0.1″)
£114.00
The DM4025SA is designed for those applications where conventional anvils aren’t going to do the job. The jaw anvil can be removed which gives the option for bespoke anvils to be inserted as well as a flat and cylindrical anvil which are supplied with the gauge. Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Acc...
DM4100 Universal Multi Anvil Micrometer 0-25mm (0-1″)
£207.00
The DM4100 is supplied with 7 pairs of interchangeable special application anvils, a spare long life battery and a battery spanner. Anvil Type Flat 6.5mm Diameter Disc 12mm Knife 60° Point 60° Blade 0.7mm Thick Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.002mm (0.0001″) Non rotatin...
DM5025 Snap Micrometer 0-25mm (0-1″)
£144.00
Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.005mm (0.00015″) Lever operated Non-rotating spindle IP65 Sealed Protection from water, coolant & oil Protected from dust ingress Zero at any point mm-inch conversion Carbide measuring faces Hardened stainless steel spindle Incremental or absolute m...
DM5025PAD Disc Snap Micrometer 0-25mm (0-1″)
£211.00
Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.004mm (0.0002″) Anvil Diameter: 20mm Non-rotating spindle IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Zero at any point mm-inch conversion Chrome plated Frame Hardened stainless steel spindle I...
DM4025BL Blade Micrometer 0-25mm (0-1″)
£125.00
Digital Micrometer Features Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.004mm (0.0002″) Blade Thickness: 0.75mm Blade Depth: 6.5mm Non-rotating spindle IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Zero at any point mm-inch conversion Chrome plated Frame Hardened sta...
Insize Digital Micrometer up to 100mm
£66.00
Features: Resolution 0.001mm/0.00005" Button function: on/off, set, mm/inch, ABS/INC Without data output SR44 or LR44 battery, automatic power off Carbide measuring faces Ratchet thimble Supplied with spherical anvil Setting standards are included(except 0-25mm/0-1")
Insize Digital Waterproof Micrometer up to 300mm
£142.00
Features: IP65 waterproof digital outside micrometer enables quick measurement around machine fluids and coolants. The carbide measuring faces and ratchet with spherical anvil create a durable, ware resistant tool which allows for repeated measurement with optional SPC cable data output for speed and accuracy up to 300mm ( 12") Resolution: 0.00...
Insize Digital Micrometers with Interchangeable Anvils up to 1000mm
£314.00
Outside micrometer with interchangeable anvils and carbide measuring faces. Measurements can be made up to 1000mm(40") Resolution 0.001mm/0.00005". IP54 waterproof. Button function: on/off, set, mm/inch, ABS/INC, data output. RS232 data output. SR44 or LR44 battery, automatic power off. Carbide measuring faces. Supplied with setting standards. ...
IP54 Digital Micrometers (Ranges up to 300mm)
£52.00
Features Ball anvil attachment IP54 Sealed Ratchet drive Locking screw Zero at any point mm-inch conversion Carbide measuring faces Hardened stainless steel spindle Incremental or absolute measurements Measuring force: 10N Power: 1.5V LR44 Battery (Included) Range Resolution Accuracy Setting standard 0-25mm (0-1”) 0.001mm (0...
IP54 Double Display Micrometer 0-30mm (0-1.2″)
£134.00
This unique micrometer has LCD display’s on both sides allowing it to be used right or left handed. Digital Micrometer Features Range: 0-30mm (0-1.2″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.003mm (0.0001″) Dual display Ball anvil attachment IP54 Sealed Ratchet drive Locking screw Zero at any point mm-inch conversion Carbide measuring faces...
IP65 Adjustable Digital Micrometers (Ranges up to 500mm)
£221.00
Features: Analogue scale Adjustment rods IP65 Sealed Water, coolant, oil and dust resistant Ratchet drive Locking screw Zero at any point mm-inch conversion Carbide measuring faces Hardened stainless steel spindle Incremental or absolute measurements Measuring force: 5-10N Power: 1.5V LR44 Battery (Included) Ran...
Micrometers 0-25mm (0.1″) 50mm or 150mm Throat
£119.00
DM4025DT50 (50mm Throat) Features: Range: 0-25mm (0.1") Resolution: 0.001mm (0.00005″) Accuracy: ±0.004mm (0.0002″) Anvil Diameter: 20mm Non-rotating spindle IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Zero at any point mm-inch conversion Chrome plated Frame Hardened stainless steel s...
Mitutoyo 293-130-10 0.0001mm Digimatic High-Accuracy Micrometer 0-25mm (0-1″)
£1,790.00
Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.0001mm (0.000005″) Accuracy: ±0.0005mm (0.00002″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.0006mm (0.00002″) Measuring Surface: 3.2mm Diameter Measuring Force: 7-9N Electromagnetic induction type BS rotary sensor Battery Life: 2.4 Years Data output Inch-mm conversion Hold function Au...
Mitutoyo 293-180-30 Digimatic QuantuMike Micrometer IP65 SPC Data Output 0-25mm (0-1″)
Micrometers
Mitutoyo 293-180-30 Digimatic QuantuMike Micrometer IP65 SPC Data Output 0-25mm (0-1″)
£325.00
Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.001mm (0.00005″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.001mm (0.00004″) IP65 Protected: Waterproof (coolant & dust resistant) 2mm travel per thimble rotation Carbide measuring faces, micro lap finish Ratchet thimble Battery Life: 2.4 Years SPC data...
Mitutoyo 293-348-30 Digimatic Micrometer IP65 Friction Thimble 0-25mm (0-1″)
£220.00
Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.001mm (0.00005″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.001mm (0.00004″) IP65 Protected: Waterproof (coolant & dust resistant) Carbide measuring faces, micro lap finish Thimble and Sleeve scale Friction thimble Hold function Measuring Spindle: 6.35...
Mitutoyo 293-676-20 Digimatic ABSOLUTE Micrometer QuickMike 0-30mm (0-1.2″)
£486.00
Micrometer Features: Range: 0-30m (0-1.2″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.002mm (0.0001″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.002mm (0.00008″) IP65 Protected: Waterproof (coolant & dust resistant) 10mm travel per thimble rotation Carbide measuring faces, micro lap finish Ratchet thimble Battery Life: 2.4 Years SPC Da...
Mitutoyo 406-350-30 Digimatic Non-Rotating Spindle Micrometer 0-25mm (0-1″)
£745.00
Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.003mm (0.00015″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.003mm (0.00012″) Ratchet Stop Non-rotating spindle Carbide measuring faces, micro lap finish SPC Data Output Battery Life: Approx. 2.4 years Hold function Auto Power OFF after 20 min non use Measu...
Mitutoyo Digimatic Micrometers IP65 Ratchet Stop 0-25mm, 25-50mm, 50-75mm, 75-100mm
Micrometers
Mitutoyo Digimatic Micrometers IP65 Ratchet Stop 0-25mm, 25-50mm, 50-75mm, 75-100mm
£215.00
This IP65 Micrometer offers outstanding accuracy without data output, is highly robust and offers the following benefits: Oil-resistant material used for all plastic parts Extraordinary battery life of approx. 2.4 years IP65: Excellent resistance against water and dust enables this micrometer to be used in machining situations that include spla...
Mitutoyo Digimatic Micrometers IP65 Ratchet Thimble 0-25mm, 25-50mm, 50-75mm, 75-100mm
Micrometers
Mitutoyo Digimatic Micrometers IP65 Ratchet Thimble 0-25mm, 25-50mm, 50-75mm, 75-100mm
£226.00
Description: This IP65 Micrometer offers outstanding accuracy without data output, is highly robust, and offers the following benefits: Oil-resistant material used for all plastic parts Extraordinary battery life of approx. 2.4 years IP65: Excellent resistance against water and dust enables this micrometer to be used in machining situations tha...
Mitutoyo Digimatic QuantuMike Micrometers IP65 0-25mm, 25-50mm, 50-75mm, 75-100mm
Micrometers
Mitutoyo Digimatic QuantuMike Micrometers IP65 0-25mm, 25-50mm, 50-75mm, 75-100mm
£228.00
This is an IP65 micrometer offering movement four times as fast as a standard micrometer. It presents you with the following benefits: Faster measurement is achieved by using a coarser thread which feeds the spindle by 2 mm per thimble rotation. Extraordinary battery life of 2.4 years Outstanding accuracy Ratched thimble mechanism ensures easy ...
Mitutoyo Digital Micrometer 0-25mm (0-1″)
£168.00
Micrometer Features: Resolution: 0.001mm Accuracy: ±0.002mm Flatness: 0.0003mm Parallelism: 0.002mm Carbide measuring faces, micro lap finish Battery Life: 2.4 Years Thimble and sleeve scale Auto Power OFF after 20 min. non use Measuring spindle: 6.35mm diameter, spindle pitch 0.5mm Additional Information: Shipping Weight: 0.6 kg Brand: Mitu...
Moore & Wright Digital External Micrometers 201 Series up to 100mm
£114.46
Features: Standard: DIN 863Protected to IP54 specificationsåÊLarge LCD displayDigital functions: mm/inch conversion, ABS/INC, on/off, zero-settingRugged steel designTungsten carbide measuring facesHammertone finished frame with high quality insulated gripTapered for easier access to difficult areasConstant force ratchet on thimbleLocking leverBa...
Moore & Wright Digital Micrometer IP65 up to 300mm
£137.74
Standard: DIN 863/1 2 Button design IP65 SPC Data output Resolution = 0.001mm / 0.00005” Carbide measuring faces mm/inch conversion Range up to 300mm Available from April 2021
Moore & Wright Large Adjustable External Metric Micrometer 220 Series
£359.39
Features Standard: DIN 863Features wide measuring range with interchangeable anvilsTube type low weight modelTungsten carbide measuring facesHardened and ground spindles/anvilsSatin-chrome scaleDural frame with insulated gripsConstant force ratchet on thimbleAdjusting keySupplied with setting standardsSupplied in wooden box
Moore & Wright Micrometer with Interchangeable Anvils 217 Series
£195.45
Features Standard: DIN 863 Features wide measuring range with interchangeable anvils Hardened and ground spindles/anvils Tungsten carbide measuring faces Satin-chrome scale Strong forged steel hammertone finish frame with insulated grip Constant force ratchet on thimble Adjusting key Supplied with setting standardsåÊ Supplied in wooden box
Moore & Wright Workshop External Micrometer Set 215 Series
£127.07
Features Standard: DIN 863Tungsten carbide measuring facesSatin-chrome scaleSatin-chrome forged steel frame with insulated gripConstant force ratchet on thimbleAdjusting keySupplied with setting standardsSupplied in wooden box
Moore and Wright Micrometers 1966 Series up to 150mm
£76.14
Features:Standard: BS870, DIN 863/1, ISO361 Tungsten carbide measuring facesSpindle diameter 6.5mmBlue textured frame Speeder type ratchetChoice of standard or vernier type sleeveLocking leverAdjusting keySupplied with setting standard Supplied in case
Moore and Wright Micrometers 1966 Series up to 6"
£76.14
Features:Standard: BS870, DIN 863/1, ISO361 Tungsten carbide measuring facesSpindle diameter 6.5mmBlue textured frame Speeder type ratchetChoice of standard or vernier type sleeveLocking leverAdjusting keySupplied with setting standard Supplied in case
Three Flute V Anvil Micrometers 1-15mm (0.03-0.5″) & 5-20mm (0.1-0.7″)
£187.00
DM4025V115 (1-15mm (0.03-0.5")) Features: Range: 1-15mm (0.04-0.6”) Resolution: 0.001mm (0.00005″) Accuracy: ±0.002mm (0.0001″) Three flute IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Locking screw Zero at any point mm-inch conversion Carbide measuring faces Hardened stainless steel sp...
Mitutoyo 422-330-30 Digimatic 0.75mm Blade Micrometer SPC Data Output 0-25mm (0-1″)
Micrometers
Mitutoyo 422-330-30 Digimatic 0.75mm Blade Micrometer SPC Data Output 0-25mm (0-1″)
£806.00
Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ± 0.003mm (0.00015″) Parallelism: 0.003mm (0.00015″) Type A Ratchet stop for constant measuring force Scale: Thimble and sleeve satin chrome finish, 18mm diameter With spindle lock: 6.35 mm diameter, spindle pitch 0.635 mm SPC Data Output Hold function This Digimatic Blade Micromete...
Mitutoyo 571-211-30 ABSOLUTE Digimatic Depth Gauge 0-150mm (0-6″)
£404.00
Range: 0-150mm (0-6″) Resolution: 0.01mm (0.0005″) Accuracy: ± 0.02mm (±0.001″) Repeatability: 0.01mm Base: 100mm x 6mm Max response speed: unlimited SPC Data output Inch/Metric his is a standard model Digital Depth Gauge. It offers you the following benefits: ABSOLUTE System gives you reliable measurements. Its base and measuring faces are h...
Mitutoyo 293-130-10 MDH 0.0001mm Digimatic High-Accuracy Micrometer 0-25mm (0-1″)
Micrometers
Mitutoyo 293-130-10 MDH 0.0001mm Digimatic High-Accuracy Micrometer 0-25mm (0-1″)
£1,790.00
Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.0001mm (0.000005″) Accuracy: ± 0.0005mm (0.00002″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.0006mm (0.00002″) Measuring Surface: 3.2mm Diameter Measuring Force: 7-9N Electromagnetic induction type BS rotary sensor Battery Life: 2.4 Years Data output Inch-mm conversion Hold function A...
Starrett 3732MEXFL-25 Digital Micrometer 0-25mm
£182.05
The 3732 Electronic Micrometer is a full-featured precision measuring tool built with customary Starrett quality and workmanship. The 3732 includes a large, easy-to-read, high contrast LCD digital readout for clear readings. With its automatic off functionality, smooth friction thimble for uniform pressure, and balanced frame design, the 3732 pr...
Starrett Digital Micrometer Depth Gauge, Ratchet Thimble, 0-150mm Range, Resolution: .00005" (0.001mm)
Depth Micrometers/Gauges
Starrett Digital Micrometer Depth Gauge, Ratchet Thimble, 0-150mm Range, Resolution: .00005" (0.001mm)
£600.00
Starrett no-glare satin chrome finish on thimble and sleeve Large, easy-to-read .275 (7mm) high contrast LCD digital readout Extremely hard and stable one-piece spindle Auto Off after 20 minutes of nonuse Inch/millimeter conversion on English versions Measurement HOLD button Zero at any position Retain and return to true zero re...
Starrett Outside Micrometer Set, Rachet Thimble, Carbide Anvil-Spindle, 0-100mm Range, .001mm
Outside Micrometers
Starrett Outside Micrometer Set, Rachet Thimble, Carbide Anvil-Spindle, 0-100mm Range, .001mm
£820.00
The Starrett S436.1 Outside Micrometer Set includes 25mm, 50mm and 75mm and 100mm micrometers, three standards, adjusting wrench, in case. The most popular precision micrometers used worldwide Accurate, rugged, and easy to use All sets come with attractive, protective case, which keep micrometers and standards together, readily accessibl...
Starrett V230MXRL Outside Micrometer, Ratchet Stop, 0-25 mm Range, 0.001 mm Graduation, -0.002 mm Accuracy
outside micrometer
Starrett V230MXRL Outside Micrometer, Ratchet Stop, 0-25 mm Range, 0.001 mm Graduation, -0.002 mm Accuracy
£150.00
Vernier scale in metric units for taking precise outside diameter (OD) measurements Ratchet-stop mechanism helps provide uniform pressure for precise, repeatable measurement Satin chrome finish helps resist rust and reduce glare High-grade tool steel construction for durability Micro-lapped carbide measuring faces help provide accuracy and wear...
Starrett 733MEXFLZ Digital Micrometer 25-50mm, 50-75mm or 75-100mm Range
£277.88
Please select range Digital LCD display with single-value display in inches and metric units for readability Statistical Process Control (SPC) output transfers results to a computer or external device via an interface cable (sold separately). The friction chamber mechanism ensures even pressure for precise, repeatable measurement. Knurled ring...
Starrett 3732MEXFL-100 Digital Micrometer without Output 75-100mm
£256.90
The Starrett 3732 Electronic Micrometer is a full-featured precision measuring tool built with customary Starrett quality and workmanship. The 3732 series includes a large, easy-to-read, high-contrast LCD digital readout for clear readings. With its automatic OFF functionality, smooth friction thimble for uniform pressure, and balanced frame des...
