Dial Indicators Digital
Mahr MarCator 1075 Digital Indicator - 12.5mm/0.5"
Dial Indicators Digital
High contrast LCD display, thus very clear and safe to read Protection cap on end of measuring pin Mounting shank and measuring spindle are both made of hardened stainless steel...
Kafer MD12 Digital Dial Gauge 0.01 range 12.5mm
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
Digital Indicator 0.01mm range 12.7mm
Dial Indicators Digital
Digital Indicator Features Range: 0-12.7mm (0.5″) Resolution: 0.01mm (0.0005″) Accuracy: ± 0.02mm (0.001″) mm / inch conversion Zero setting at any point Absolute or Relative measurements Preset Function Mounting back plate...
Insize Digital Dial Indicator
Dial Indicators
Plunger clock type digital indicator. The dual-reading scale aids measurement in both directions, has a range of up to 12.7mm. Comes with optional SPC cable data output. Economic model. Button...
Insize Rotation 320deg Display Digital Dial Indicator
Dial Indicators
Reading in digit and analogue. Display can be rotated by 320 deg . Functions: tolerance GO and NO GO display, data pre-set, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental...
Starrett 2900-4 LCD Digital Indicator, 0.375" Stem Dia., 0-0.5"/0-12mm Range, Selectable Resolution
digital indicator
True Absolute Sensor Technology remembers position and zero set point even during battery replacement. Cannot be over-sped into failure. Intuitive design and layout - easy to learn and use Positive,...
Kafer FMD25T Digital Dial Gauge 0.001 range 25mm
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
DI1201 0.001mm Digital Indicator 0-12.7mm (0.5″)
Dial Indicators Digital
Digital Indicator Features Range: 0-12.7mm (0.5″) Resolution: 0.001mm (0.00005″) Accuracy: ± 0.003mm (0.00015″) mm / inch conversion Zero setting at any point Absolute or Relative measurements Preset Function Mounting back plate...
Mahr MarCator 1086 R Digital Indicator: Range 12.5mm/0.5"; Resolution 0.01mm OR Selectable
Dial Indicators Digital
High contrast LCD display, thus very clear and safe to read Operating and display unit (bezel) can be rotated through 280° Lifter protection cap on the measuring spindle Mounting shank...
Mahr MarCator 1086 R Digital Indicator: Range 25mm/1"; Resolution 0.01mm
Dial Indicators Digital
High contrast LCD display, thus very clear and safe to read Operating and display unit (bezel) can be rotated through 280° Lifter protection cap on the measuring spindle Mounting shank...
Mahr MarCator 1086 R Digital Indicator: Range 50mm/2"; Selectable Resolution
Dial Indicators Digital
High contrast LCD display, thus very clear and safe to read Operating and display unit (bezel) can be rotated through 280° Lifter protection cap on the measuring spindle Mounting shank...
Mahr MarCator 1086 R Digital Indicator: 100mm/4" Range, Selectable Resolution
Dial Indicators Digital
High contrast LCD display, thus very clear and safe to read Operating and display unit (bezel) can be rotated through 280° Lifter protection cap on the measuring spindle Mounting shank...
Mahr MarCator 1086 R Digimatic IP42 Digital Indicator : 25mm Range, Selectable Resolution
Dial Indicators Digital
Digital indicator MarCator 1086 R IP protection category: IP 42 Data interface: Digimatic, Opto RS-232C, USB Factory standard Measuring span in mm: 25mm Resolution: 0.0005, 0.001, 0.002, 0.005, 0.01 Resolution...
Mahr MarCator 1086 Ri Digital Indicator: Range 12.5mm/0.5"; Resolution 0.01mm OR Selectable
Dial Indicators Digital
Integrated wireless transmitter High-contrast LCD display Operating and display unit can be rotated 280° Mounting shaft and measuring pin in hardened stainless steel Ready to measure immediately thanks to reference...
Mahr MarCator 1086 Ri IP42 Digimatic Digital Indicator : Range 25mm; Selectable Resolution
Dial Indicators Digital
Digital indicator MarCator 1086 R IP protection category: IP 42 Data interface: Digimatic, Opto RS-232C, USB Factory standard Measuring span in mm: 25mm Resolution: 0.0005, 0.001, 0.002, 0.005, 0.01 Resolution...
Mahr MarCator 1087 R Digital Indicator - 12.5mm/0.5"
Dial Indicators Digital
High contrast LCD display, thus very clear and safe to read Operating and display unit (bezel) can be rotated through 280° Immediate measurements due to the Reference System Lifter protection...
Mahr MarCator 1087 Ri Digital Indicator: Range 12.5mm/0.5"; Selectable Resolution
Dial Indicators Digital
Integrated wireless transmitter High-contrast LCD display Operating and display unit can be rotated 280° Lift-off cap on end of measuring pin Mounting shaft and measuring pin in hardened stainless steel...
Kafer KMD12T Digital Dial Gauge 0.01 range 12.5mm
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
Kafer MD25T Digital Dial Gauge 0.01 range 25mm
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
Kafer MD1T0 Digital Dial Gauge 0.01 range 50mm
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
Kafer FMD50T Digital Dial Gauge 0.001 range 50mm
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
Kafer FKMD5R Digital Dial Gauge with Back Plunger
Dial Indicators
Following functions of the Digital Dial Gauge can be used: Zero setting mm/inch selection Memory set Hold Data transmission Ref I / Ref II Preset value recall Selection of measuring...
Insize Waterproof Digital Dial Indicator
Dial Indicators
Functions ON/OFF mm/inch Zero DATA (when connected with a dataconnection cable) Features Suitable for static measuring Data output via USB or RS232C,optional cable required Digital display Auto power off IP54...
Digital Absolute Indicator 430-DABS Series
Dial Indicators
Absolute measuring system RS232 digimatic output CR2032 battery 8mm/H7 clamping stem Comes with lug and flatback Functions: Tolerances, mm/inch conversion, pre-set, data output IP54 rated
Moore & Wright Digital Indicator 405 Series
Dial Indicators Digital
Features Digital functions: Direct mm / inch conversion, ABS/ INC, zero-setting 58mm dial face Lugback and 8mm stem mountings Also supplied with flatback Code No. Range (mm) Range (inch)...
Mahr Millimess µMaxµm II Inductive Digital Comparator: Range ±1 mm, Selectable Resolution
Dial Indicators Digital
Inductive digital comparator Millimess µMaxµm II IP protection category: IP 54 Data interface: Digimatic, Opto RS-232C, USB Data output Maxµm: Factory standard Measuring span in mm: ±1 mm Resolution: 0.0002,...
Mahr Millimess 2001 Wi Inductive Dial Comparator
Dial Indicators Digital
Touch operating keys:Reliable operation in the measuring system Fully hardened glass display:Robust and completely insensitive Linearized inductive probe measuring system:Integrated measuring system for more precise measurements with a highly accurate...
Electronic Fine Reading Digital Dial Indicator EDI-125 | Range 0-12.5mm/0-1/2" | Resolution 0.001mm/0.00005" | Accuracy +/- 0.005mm
Dial Indicators Digital
Measuring Range 0-12.5mm/0-1/2" Resolution 0.001mm/0.00005" Repeatability 0.001mm/0.00005" Accuracy +- 0.005mm Measuring speed: <0.5m/sec Clear LCD display Extra large 14mm digits Lug back Fitted with ball anvil Anvil thread M2.5mm Stem...
Electronic Digital Multi-Function Indicator with Fan EDI-13 | Range 0-12.7mm/0-0.5" | Resolution 0.002mm/0.00005" | Fan range +/- 0.250mm/0.025" | Accuracy 0.015mm/0.00064" | Flat Lug Back
Dial Indicators Digital
Large clear LCD display Digital Fan for Run-Out viewing Range: 0 – 12.7mm / 0 – 0.5” Digit Resolution: 0.002mm / 0.00005” Fan range: ± 0.250mm/0.025” Accuracy: 0.015mm / 0.00064”...
Three Piece Electronic Measuring Set | Electronic Dial Gauge | Digital Caliper | Magnetic Base
Dial Indicator Stand
Set contains 3 of the most popular measuring and setting tools, electronic dial gauge, digital caliper & magnetic base, conveniently housed in a fitted storage case. 1 x Large Face...
Magnetic Base & Digital Indicator Kit
Dial Indicator Stand
Magnetic Base with solid cross arm Holds Plunger and Lever Indicators Plunger Indicators held on Lug Back or 8mm Stem Lever Indicators held on spigots Overall Height: 230mm Main Upright...
Noga Holding: PH Indicator Holder Fine Adjustment with Universal Swivel Clamp
Dial Indicator Stand
NOGA PH (Post Holder) holders are the latest improvement of the traditionalindicator holder. New fine adjustment on the top with universal swivel clamp (FAT) Holds 6mm, 8mm, 3/8”, dovetail Powerful...
Noga Holding: PH Indicator Holder with Fine Adjustment Base (FAB)
Dial Indicator Stand
NOGA PH holders with unique fine adjustment at base (FAB). Single direction fine adjustment at base Powerful on/off magnetic base Universal swivel clamp for all dial and test indicators Holds...
Noga Holding NF 1020 Holder 320N Force
Dial Indicator Stand
On/Off switchable magnet. 5 axis Holder 360° fine adjustments at base Holds indicator with 6 & 8mm stem and dovetail Central locking mechanism with NOGA designed spring loaded bearing Black...
Noga Holding NF 1030 Holder 280N Force
Dial Indicator Stand
Permanent magnet 5 axis Holder 360° fine adjustments at base Holds indicator with 6 & 8mm stem and dovetail Central locking mechanism with NOGA designed spring loaded bearing Black oxide...
Noga Holding Articulated Holder (FAT) | Fine Adjustment Top with Universal Clamp | 320N ; 800N or 1300N Force
Dial Indicator Stand
Please select model from drop down box Due to it’s stability and ease of use, Noga’s articulated holders have become the industry’s most desired New fine adjustment on top with...
Noga Holding Articulated Holder (FAB) | Fine Adjustment at Base | 320N OR 800N Force
Dial Indicator Stand
NOGA has developed a unique fine adjustment mechanism which isplaced on the magnetic base. This mechanism allows the hand to rest on the base rather than on the clamp of...
Noga Holding Dual Articulated Holder (FAT & FAB) | Fine Adjustment at Top & Base | 800N Force
Dial Indicator Stand
Noga articulated holders with double fine adjustment New double fine adjustment:- BOTTOM unique single direction- TOP universal swivel clamp Holds 6mm, 8mm, 3/8” and dovetail Unique central locking mechanism with...
Noga Holding Standard Holder DG 1030 | 800N Force
Dial Indicator Stand
The Noga dial gauge holding system has two articulated arms, which can be easily locked into any postion by a single central locking knob. Fine adjustment. Holds indicator with 8mm...
Noga Holding Standard Holder DG 1040 | 350N Force
Dial Indicator Stand
The Noga dial gauge holding system has two articulated arms, which can be easily locked into any position by a single central locking knob. Fine adjustment. Holds indicator with 6...
Noga Holding Magnetic Bases
Dial Indicator Stand
HS 1100: 20kg (200N) Pull | Thread size: M5 NF 0037: 32kg (320N) Pull | Thread size: M NF 3778: Fine Adjustment system fitted to top of base | 32kg...
Noga FAT & FAB Dual Fine Adjustment System | 320N or 800N Force
Dial Indicator Stand
Please select model below: Noga articulated holders with double fine adjustment New double fine adjustment:- BOTTOM unique single direction- TOP universal swivel clamp Holds 6mm, 8mm, 3/8” and dovetail Unique...