Bore gages and ID gages are designed for dimensional measurement or assessment of the internal diameter of components. Bore gages and ID gages are available that employ mechanical or electronic readout
Indicating bore gages are gaging devices for comparative measurements where the linear movement of a spindle or plunger is amplified and displayed on a dial, column or digital display.
3-point bore gages have three contact points mounted on arms that expand out from a central point. 3-point bore gages can detect lobe or out-of-roundness conditions, which is an advantage over 2-point ID gages. These gages can have either a dial bore indicator or a digital display.
Bore Micrometers/Gauges
Digital Bore Micrometers 3 point 12-16mm ; 16-20mm ; 20-25mm | Resolution 0.001mm
Bore Gauges
Digital Bore Micrometers 3 point 12-16mm ; 16-20mm ; 20-25mm | Resolution 0.001mm
£245.00
Features: Resolution: 0.001mm IP54 protection level 150mm extension rod for measuring deeper bores Carbide-tipped contact points Supplied with setting ring Packed in aluminium box
3 Point Digital Bore micrometer
£264.00
Bore Micrometer Features Resolution: 0.001mm (0.00005") Accuracy: 0.003mm (0.00015") Sealed to IP54 standard Protected from water, coolant and oil splashes Completely protected from dust ingress Absolute or Incremental measurement Carbide measuring faces Extendable by 100mm mm-inch conversion Ratchet drive Setting ring (over 100mm not incl) Pow...
Digital Two/Three Point Internal Bore Micrometers | Insize 3127 Series | IP65 | Ranges from 6mm to 300mm/0.24" to 11.81" | Resolution 0.001mm/0.00005
Bore Gauges
Digital Two/Three Point Internal Bore Micrometers | Insize 3127 Series | IP65 | Ranges from 6mm to 300mm/0.24" to 11.81" | Resolution 0.001mm/0.00005
£601.00
DM Three-Point Digital Bore Gauge Set (6-12mm & 12-20mm)
£705.00
6-12mm Bore Gauge Set Features: Resolution: 0.001mm (0.00005″) Accuracy: 0.003mm (0.00015″) Sealed to IP54 standard Protected from water, coolant and oil splashes Completely protected from dust ingress Absolute or Incremental measurement Carbide measuring faces Extendable by 100mm mm-inch conversion Ratchet drive Setting ring Power: 1.5V LR44 B...
Three Point Internal Micrometer Sets DIN 863 - 6-12mm ; 12-20mm ; 20-40mm Resolution: 0.005mm
Internal Micrometers
Three Point Internal Micrometer Sets DIN 863 - 6-12mm ; 12-20mm ; 20-40mm Resolution: 0.005mm
£872.00
Please ensure correct range is selected Sets include either 2, or 3 individual 3 point micrometer Complete with setting rings for setting all the micrometers in the set Resolution: Metric 0.005mm Micro fine graduations for accurate reading Ratchet stop Non-glare satin chrome barrel and sleeve Supplied in fitted case with extension, setting r...
Three Point Internal Micrometers DIN 863 Ranges from 6mm to 100mm Resolution: 0.005mm
internal micrometers
Three Point Internal Micrometers DIN 863 Ranges from 6mm to 100mm Resolution: 0.005mm
£290.00
Please ensure correct range is selected Resolution: Metric 0.005mm Micro fine graduations for accurate reading Ratchet stop Non-glare satin chrome barrel and sleeve Supplied in fitted case with extension, setting ring and adjusting tools
DM 3 Point Analogue Bore Micrometer Sets
£566.00
Bore Gauge Features Carbide measuring faces Ratchet drive Setting ring Package Adjustment tools Setting ring Case Operating Manual
DM 3 Point Analogue Bore Micrometers
£192.00
Bore Gauge Features Resolution: 0.001mm Accuracy: 0.004mm Carbide measuring faces Extendable by 100mm Ratchet drive Setting ring Package Adjustment tools Extension rod Setting ring Case Operating Manual
Mahr Micromar 44 AS 3-Point Bore Micrometer Set 6-12mm | 12-20mm | 20-50mm | 50-100mm
micrometers
Mahr Micromar 44 AS 3-Point Bore Micrometer Set 6-12mm | 12-20mm | 20-50mm | 50-100mm
£1,167.00
3-point inside micrometer - in Set Micromar 44 ASFor measuring: Through holes Blind holes Centering shoulders DIN 863-4 Measuring range mm: 6-12mm, 12-20mm, 20-50mm, 50-100mm Graduation value mm: 0,001mm (6-12mm & 12-20mm) 0,005mm (20-50mm & 50-100mm) Package contains: instruction manual, setting rings, key for replacing measuring heads...
Mahr Micromar 44 Cms 2 Bore Micrometer Set 100-300mm
£680.40
For measuring inside diameters and distance dimensions, as well as use as a adjustable gauge for setting parallel distances DIN 863-4 Measuring range mm: 100 - 300 mm Graduation value mm: 0.01 Package contains: case, measuring head 44 Cm, measuring range of 100-150 mm with extensions 44 Cv, Operating and display units with satin chrome fini...
Mahr Micromar 44 Cms 1 Bore Micrometer Set 100-150mm
£502.20
For measuring inside diameters and distance dimensions, as well as use as a adjustable gauge for setting parallel distances DIN 863-4 Measuring range mm: 100 - 150 mm Graduation value mm: 0.01 Package contains: case, measuring head 44 Cm, measuring range of 100-150 mm with extensions 44 Cv, Operating and display units with satin chrome finis...
Mahr Micromar 44 Cms 3 Bore Micrometer Set 100-500mm
£766.80
For measuring inside diameters and distance dimensions, as well as use as a adjustable gauge for setting parallel distances DIN 863-4 Measuring range mm: 100 - 500 mm Graduation value mm: 0.01 Package contains: case, measuring head 44 Cm, measuring range of 100-150 mm with extensions 44 Cv, Operating and display units with satin chrome fini...
Starrett 124MAZ Solid Rod Inside Micrometer Set 50-200mm
£259.06
The Starrett 124 Solid-Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease-of-use and range. They are very useful for measuring the inside diameters of cylinders and rings and measuring parallel surfaces.The desired range is obtained by assembling rods and spacing collars to the micrometer head. Me...
Starrett 124AZ Solid Rod Inside Micrometer Set 2-8”
£259.06
The Starrett 124 Solid-Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease-of-use and range. They are very useful for measuring the inside diameters of cylinders and rings and measuring parallel surfaces.The desired range is obtained by assembling rods and spacing collars to the micrometer head. Me...
Precision Bore Gauge For Small Holes Insize
£162.00
Digital and Vernier Insize Bore Gauge for small holes covering the range of 6mm diameter to 18.5mm. Measuring depth is approximately 100mm. Optional accessories include setting rings for accurate and repeatable measurement the gauge also has optional SPC cable data output. Optional accessory: setting ring
Bore Gauge Insize
£103.00
Optional accessory: setting ring (6312 Series), Long handle (7351 Series)
Bowers XT3 Digital Bore Gauge with Bluetooth - Metric
£1,036.35
Bowers’ Bluetooth XT3-BT digital internal micrometers offer an ergonomic design - including a larger and clearer LCD display - along with IP67 electronics protection, proximity output; allowing bi-directional communication giving greater flexibility for data acquisition and storage. The extended mechanical travel of the XT range means that speci...
Mechanical Bore Gauges - XT Analogue
£290.57
Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of...
Mitutoyo Digital 3-Point IP65 Internal Micrometers (Various Ranges)
internal micrometers
Mitutoyo Digital 3-Point IP65 Internal Micrometers (Various Ranges)
£1,020.00
These are three-point internal micrometers that offer you the following benefits: Individual micrometer Titanium-coated measuring pins give you excellent durability and impact resistance They also have excellent resistance against water and dust (IP65 protection level), allowing you to use this product in machining situations that include splas...
Moore & Wright Mechanical Cylinder Bore Gauge
£129.01
Bore Gauge Features Interchangeable contact points Set of carbide tipped contact points included Self centering device Supplied with a dial indicator Packed as a set with all necessary accessories to measure the complete range as shown Range Resolution Measuring Depth 6-10mm 0.01mm 50mm 10-18mm 0.01mm 100mm 18-3...
Digital Cylinder Bore Gauge for Small Holes Insize 6 - 18.5mm
£312.00
Digital Insize Bore Gauge for small holes covering the range of 6mm diameter to 18.5mm. Measuring depth is approximately 100mm. Optional accessories include setting rings for accurate and repeatable measurement the gauge also has optional SPC cable data output. Optional accessory: setting ring
Digital Cylinder Bore Gauges | Insize 2122 Series | 18-35mm ; 35-60mm ; 50-160mm ; 160-250mm ; 250-450mm
Bore Gauges
Digital Cylinder Bore Gauges | Insize 2122 Series | 18-35mm ; 35-60mm ; 50-160mm ; 160-250mm ; 250-450mm
£266.00
Optional accessory: go to setting rings Insize to select required size also long handles available.
Bore Gauge Insize 400-800mm
£257.12
Bore Gauge from 400-800mm. Optional accessories include setting rings for accurate and repeatable measurement the gauge. Optional accessory: setting ring (code 6312).
Moore & Wright Dial Bore Gauge Setting Master 720 Series
£289.54
Features• Bore Gauge Setting Master Kit for accurately setting any 2 point bore gauge up to 160mm in diameter to an accuracy of 0.01mm• Setting master and 33 piece metric gauge block set supplied in plastic caseSetting Device• Internal range 160mm• Depth range 25mm• Centraliser width 70mm• Quick-release holder for fast adjustmentGauge Block Set•...
Bowers MicroGauge - 2 Point Bore Gauging Large Sets 1- 6mm
£2,214.80
The new MicroGauge 2-point bore gauging large sets have been designed specifically for the measurement of small bores between 1.0-6.00mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and f...
Bowers FTS001 Floating Table Stand
£981.96
Floating table stand, designed to lift the product to the measuring implement. The floating table ensures that the product is level.
Insize Data Output Cable (for Calipers) -7302 Series
£96.00
This data output cable is used to transmit measurements from digital measuring tools. Data is transmitted as a keyboard signal which can be read and used with Microsoft Excel, Word, txt softwares and more. Different data cables are available depending on the measuring tool that the data is ouputting from. Up to 2.5m cable length allows for easy...
Insize Setting Rings 1.55 - 300mm
£168.00
Calibration setting ring, for quick and accurate setting of bore gauges, micrometers etc. For zero setting of inside micrometers, three points internal micrometers and bore gauges. Uncertainty in the diameter calibration value: ±1.5µm for ü2-100mm ±2.5µm for 125-200mm. Cylindricity: 1µm for ü2-60mm 1.5µm for 62-90mm 2µm for 100-200mm. DIN2250-1...
Bowers XT Setting Rings - Imperial
£113.35
Starrett Bore Gauge Set 10-18mm
£214.77
The 3089 Dial Bore Gauges offer precision, a full range of features and excellent value. Ergonomic design with non-slip insulating grip and all anvils are laser marked for easy selection. Includes a sturdy aluminium case with cutouts for gauge and all accessories. Ergonomic design with non-slip insulating grip Carbide contacts for extended wea...
Mitutoyo 568-474 (0.001mm) ABSOLUTE Digimatic Borematic Snap-Open Bore Gauge 101.6-114.3mm (4-4.5″)
Bore Gauges
Mitutoyo 568-474 (0.001mm) ABSOLUTE Digimatic Borematic Snap-Open Bore Gauge 101.6-114.3mm (4-4.5″)
£1,690.00
Bore Gauge Features Range: 101.6-114.3mm (4-4.5″) Resolution: 0.001mm (0.00005″) Accuracy: ± 0.006mm (0.0003″) Measuring depth: 74.7mm (2.94″) Measuring face: Titanium coated tungsten carbide, taper: tungsten carbide Measuring method: 3-point Constant measuring force ZERO/ABS Function lock DATA (output with cable) / HOLD (display value) 2 x PRE...
Tubular Inside Micrometers DIN 863 - 50-250mm ; 50-600mm ; 150-2000mm ; 1000-3000mm Resolution: 0.01mm
Internal Micrometers
Tubular Inside Micrometers DIN 863 - 50-250mm ; 50-600mm ; 150-2000mm ; 1000-3000mm Resolution: 0.01mm
£183.60
Please ensure correct range is selected (1000-3000mm POA, enquire here) Sets consist of an inside micrometer head and a series of extension rod tubes of different lengths with tungsten carbide measuring faces Resolution: Metric 0.01mm Micro fine graduations for accurate reading Tungsten carbide tips Spindle locking knob Non-glare satin chrom...
Extension Rod Inside Micrometers 50-300mm/2-12" Resolution: Metric 0.01mm, Inch 0.001”
Internal Micrometers
Extension Rod Inside Micrometers 50-300mm/2-12" Resolution: Metric 0.01mm, Inch 0.001”
£249.00
Please ensure correct range is selected Lightweight measuring set contains: Micrometer Head: Metric Range 13mm, Graduated 0.01mm Inch Range 0.5", Graduated 0.001" Non-glare satin chrome thimble and sleeve Hardened and ground measuring tips Each set contains 10 extensions, plus a 13mm or 1/2" sleeve A convenient handle enable measurement of ...
Inside Micrometers DIN 863 - 5-30mm/0.2-1.2" ; 25-50mm/1-2" ; 50-75mm/2-3" ; 75-100mm/3-4" Resolution: Metric 0.01mm, Inch 0.001”
Internal Micrometers
Inside Micrometers DIN 863 - 5-30mm/0.2-1.2" ; 25-50mm/1-2" ; 50-75mm/2-3" ; 75-100mm/3-4" Resolution: Metric 0.01mm, Inch 0.001”
£117.80
Please ensure correct range is selected Resolution: Metric 0.01mm, Inch 0.001” Micro fine graduations for accurate reading Spindle locking screw Ratchet stop Non-glare satin chrome barrel and sleeve Supplied in fitted case with adjustment tools
Large Range Inside Micrometers DIN 863 5-55mm/0.2-2.2" Resolution: Metric 0.01mm, Inch 0.001”
Bore Gauges
Large Range Inside Micrometers DIN 863 5-55mm/0.2-2.2" Resolution: Metric 0.01mm, Inch 0.001”
£223.80
Please ensure correct range is selected Two pairs of measuring anvils provide a greater measuring range Lower anvil range: 5-30mm/0.2-1.2" Upper anvil range: 30-55mm/1.2-2.2" Setting ring supplied with each micrometer: 30mm/1.2" Non glare satin chrome body & ratchet style thimble Graduations: 0.01mm/0.001" Supplied in fitted case with a...
Mahr Micromar 44 EWR Digital Inside Micrometers | IP52 | Ranges from 6mm to 200mm/0.25" to 7.9" | Resolution 0.001mm/0.00005"
Bore Gauges
Mahr Micromar 44 EWR Digital Inside Micrometers | IP52 | Ranges from 6mm to 200mm/0.25" to 7.9" | Resolution 0.001mm/0.00005"
£1,161.00
Digital inside micrometer Micromar 44 EWRFor measuring: Through holes Blind holes Centering shoulders IP protection category: IP 52 Data interface: Digimatic, Opto RS-232C, USB DIN 863-4 Resolution mm/inch 0.001 / .00005" Package contains: basic units 44 EWg, measuring head 44 Ak, instruction manual, battery, case Threaded connecti...
Dial Bore Gauge Sets | 10-18mm/0.4"-0.7" | 18-35mm/0.7"-1.5" | 35-50mm/1.4"-2.4" | 50-100mm/2"-4"
Bore Gauges
Dial Bore Gauge Sets | 10-18mm/0.4"-0.7" | 18-35mm/0.7"-1.5" | 35-50mm/1.4"-2.4" | 50-100mm/2"-4"
£155.00
Please ensure correct size is selected The Dial Bore Gauge provides a two point measuring system for comparative measurement of component hole size. It will also detect ovality and taper in bores. These instruments are fitted with spring loaded centralising mechanisms which ensure the measurement is taken across the true diameter of the compon...
Bore Gauge Setter | 0-160mm | 7353 Series (Insize)
£510.00
The Insize 7353 Series Bore Gauge Setter is for vertical and horizontal use and is to be used with Gauge Blocks. Available with or without Gauge Block Set with includes 33 blocks. Vertical and horizontal use. To be used with Gauge Blocks. Available with or without gauge block set.
Digital Three Point Internal Bore Micrometer Sets | Insize 3127 Series | IP65 | Range 6-12mm/0.24-047" | 12-20mm/0.47-0.79" | 20-50mm/0.79-1.97" | 50-100mm/1.97-3.94" | Resolution 0.001mm/0.00005"
Bore Gauges
Digital Three Point Internal Bore Micrometer Sets | Insize 3127 Series | IP65 | Range 6-12mm/0.24-047" | 12-20mm/0.47-0.79" | 20-50mm/0.79-1.97" | 50-100mm/1.97-3.94" | Resolution 0.001mm/0.00005"
£1,100.00
Digital Wide Range Three Point Internal Bore Micrometer Sets | Insize 3128 Series | IP54 | DIN863-4 | Range 50-70mm/1.97-2.76" | 70-100mm/2.76-3.94" | 100-150mm/3.94-5.91" | 150-250mm/5.91-9.84" | 200-300mm/7.87-11.81" | Resolution 0.001mm/0.00005"
£488.00
