Bore gages and ID gages are designed for dimensional measurement or assessment of the internal diameter of components. Bore gages and ID gages are available that employ mechanical or electronic readout
Indicating bore gages are gaging devices for comparative measurements where the linear movement of a spindle or plunger is amplified and displayed on a dial, column or digital display.
3-point bore gages have three contact points mounted on arms that expand out from a central point. 3-point bore gages can detect lobe or out-of-roundness conditions, which is an advantage over 2-point ID gages. These gages can have either a dial bore indicator or a digital display.
Bore Micrometers/Gauges
Digital Bore Micrometers 3 point 12-16mm ; 16-20mm ; 20-25mm | Resolution 0.001mm
Bore Gauges
Three Point Internal Micrometer Sets DIN 863 - 6-12mm ; 12-20mm ; 20-40mm Resolution: 0.005mm
Internal Micrometers
Three Point Internal Micrometers DIN 863 Ranges from 6mm to 100mm Resolution: 0.005mm
internal micrometers
Mitutoyo Digital 3-Point IP65 Internal Micrometers (Various Ranges)
internal micrometers
Tubular Inside Micrometers DIN 863 - 50-250mm ; 50-600mm ; 150-2000mm ; 1000-3000mm Resolution: 0.01mm
Internal Micrometers
Extension Rod Inside Micrometers 50-300mm/2-12" Resolution: Metric 0.01mm, Inch 0.001”
Internal Micrometers
Inside Micrometers DIN 863 - 5-30mm/0.2-1.2" ; 25-50mm/1-2" ; 50-75mm/2-3" ; 75-100mm/3-4" Resolution: Metric 0.01mm, Inch 0.001”
Internal Micrometers
Dial Bore Gauge Sets | 10-18mm/0.4"-0.7" | 18-35mm/0.7"-1.5" | 35-50mm/1.4"-2.4" | 50-100mm/2"-4"
Bore Gauges
