Products

Mahr Millimar P2004 T Inductive Probe : ± 2 mm (Tesa Compatible)

£301.00

Inductive probe Millimar P2004 T Compatibility: Tesa Measuring range mm: ± 2 mm Standard model Measuring force (N): 0,75 N +/- 0,15 N Package contains: instruction manual, cap for radial cable output, spanner for preliminary stroke setting Models with or without pneumatic lifter or load Measuring pin mounted in rotary stroke bearing High line...

Mahr Millimess 1003 Dial Comparator - Range: ±0.05mm ; Graduation: 1 micron

£221.00

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess 1003 T Dial Comparator - Range: ±0.05mm; Graduation: 1 micron IP54

£235.80

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess 1003 XL Dial Comparator - Range: ±0.13mm Graduation: 2 micron

£221.00

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess 1003 Z Dial Comparator - Range: ±.0020" ; Graduation: 5.0E-5 inch

£216.90

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess 1004 Dial Comparator - Range: ±0.13mm ; Graduation: 5 micron

£216.90

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess 1010 Dial Comparator - Range: ±0.25mm ; Graduation 0.01mm

£165.00

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess 2000 Wi Inductive Dial Comparator IP64 | Measuring Span +/- 1mm | Resolution 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01mm

£699.30

Touch operating keys:Reliable operation in the measuring system Fully hardened glass display:Robust and completely insensitive Linearized inductive probe measuring system:Integrated measuring system for more precise measurements with a highly accurate resolution of up to 0.1 µm Unique measured value classification:Innovative, visual repr...

Mahr Millimess 2001 Wi Inductive Dial Comparator IP64 | Measuring Span +/-1mm | Resolution 0.0001, 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01mm

£788.40

Touch operating keys:Reliable operation in the measuring system Fully hardened glass display:Robust and completely insensitive Linearized inductive probe measuring system:Integrated measuring system for more precise measurements with a highly accurate resolution of up to 0.1 µm Unique measured value classification:Innovative, visual repr...

Mahr Millimess Dial Comparator 1002 - Range: ±0.05mm ; Graduation: 0.5 micron

£396.00

Large, high contrast dial face Adjustable tolerance markers Lockable fine adjustment screw Shockproof movement Mounting shank and measuring spindle are both made of hardened stainless steel Measuring spindle is mounted in a high precision ball guide for minimal hysteresis Resistant to lateral forces (side play) acting on the measuring spindle M...

Mahr Millimess µMaxµm II Inductive Digital Comparator: Range ±1 mm, Selectable Resolution

£766.80

Inductive digital comparator Millimess µMaxµm II IP protection category: IP 54 Data interface: Digimatic, Opto RS-232C, USB Data output Maxµm: Factory standard Measuring span in mm: ±1 mm Resolution: 0.0002, 0.0005, 0.001, 0.002, 0.005, 0.01, 0.02 Resolution inches: .00001", .00002", .00005", .0001", .0002", .0005", .001" Clamping shaft: x Pack...

Mahr Module for Incremental Sensors Millimar N 1702 VPP

£377.00

Flexibly combinable RS-485 bus modules Powerful connection modules for evaluatingincremental measuring sensors or encoders Reference point evaluation Synchronous data retrieval from multiple connected measuring probes Can be used as a measuring module on the Millimar C 1202 as of firmware version 1.1.0.0 Connection of N 1700 modules via USB int...

Mahr Module for Inductive Probes Millimar N 1702 M

£402.00

Versatility for a wide range of measuring tasks Interchangeable N 1700 modules as measuring channels for inductive andincremental probes or for pneumatic measuring equipment. Perfect display thanks to high resolution and high contrast color screen Fully adjustable display for ideal viewing angle Variable display of measuring values, either as a...

Mahr Module for Inductive Probes Millimar N 1702 M-HR

£856.00

Flexibly configurable RS-485 bus modules Powerful connection modules for evaluating measuring sensors (inductive) High resolution of measuring signal, 0.01 µm Synchronous data retrieval from multiple connected measuring probes Connection of N 1700 modules via USB interface to the smart, universal evaluation and configuration software Millimar C...

Mahr Multimar 844 T Universal Measuring Instrument

£2,016.00

Universal measuring instrument Multimar 844 T Application range outside: 80 - 235 Application range inside: 110 - 265 Package contains: instruction manual, mounting and resting blocks, wooden case, excludes indicator, without arms/attachments and anvils nterchangeable measuring arms, anvils and stop elements (optional accessories) for easy ad...

Mahr Precimar SM 60 | Length measuring bench for external measurements | 0-60mm Range | 1 N OR 5 N Measuring force

£1,485.00

Length measuring bench for external measurements with 60 mm application range The Precimar SM 60 is an easy-to-use measuring instrument for fast, precise external measurements on workpieces. Simple setup of the device Can be used close to production due to robust design Quick adaptation to new workpieces Freely selectable measuring equipment (e...

Master Vernier Calipers DIN 862 - 300mm/12"; 600mm/24"; 1000mm/40"

£112.00

Please ensure correct size is selected Hardened stainless steel body Satin chrome plated Micro-fine graduations, machine divided and engraved Sliding surface raised to prevent wear to scale Dual reading: Metric grads. = 0.02mm, Inch grads. = 0.001”  Minimum internal measurement (51-110-012 & 51-110-024: 10mm (5mm per jaw)  Minimum internal ...

Measuring Bench Centers for cylinder measurement with outside diameter 3-140mm or inside diameter 1-12mm | Insize 4739 Series | 150mm Center Distance

£905.00

Measuring Bench Centers for cylinder measurement with outside diameter 3-180mm or inside diameter 1-40mm | Insize 4738 Series | 150mm Center Distance

£955.00

Mechanical Bore Gauges - XT Analogue

£290.57

Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of...

Medium Duty Magnetic Dial Indicator Magnetic Base

£51.40

Medium duty magnetic base Push button style Three precision ground contact surfaces Base dimensions: Length 48mm | Height 50mm | Width 40mm Clamping force 290 N Upright: Ø12mm chrome plated steel Cross arm: Ø10mm chrome plated steel Holds indicator stems up to 3/8" & lug back Weight 1100g | Width 95mm | Height 60mm | Length 250mm

Medium Duty Magnetic Dial Indicator Magnetic Base with Fine Adjustment

£66.60

Medium duty magnetic base Push button style Three precision ground contact surfaces Base dimensions: Length 48mm | Height 50mm | Width 40mm Clamping force 290 N Upright: Ø12mm chrome plated steel Cross arm: Ø10mm chrome plated steel Holds indicator stems up to 3/8" & lug back Weight 1100g | Width 95mm | Height 60mm | Length 260mm

Mercer/A&E Gauges 2 Jet Air Plug

£213.00

Mercer 2 Jet Air Plugs come as through or blind all lengths and sizes manufactured to order, now comes with easy entry pilot lead. 2 rings required with each plug to set range. Plugs over 62mm price includes handle & hose. Information required on order: Model: Clearline 25-0-25 or 50-0-50 or air/elec ? Maximum and minimum diameter + length ?...

Mercer/A&E Gauges Clearline

£599.00

The Mercer Clearline is easy to use:- Check air pressure gauge pointer is within red lines. Set range with magnification and zero controls using minimum and maximum setting rings. Adjust red and green pointers to component tolerance. Products specifications Range (millimetres) 0.025mm Graduation (millimetres) 0.001mm Range (inches) 0.0...

Mercer/A&E Gauges Handle & Hose Assy

£110.00

Handle & hose assy to connect air plugs to Clearline air gauge unit to allow remote gauging of parts, standard length of hose 1m.

Mercer/A&E Gauges Master Setting Rings

£189.00

Mercer system requires 2 rings to set maximum & minimum range. UKAS certificate extra.

Metro M1/M3 Air Gauge

£1,144.00

The Metro M1/M3 is the last generation of tool for dimensional control with an air gauge : air ring, air plug gauge, air fork etc. They are compatible with all two ring air gauge brands, making it possible to use your existing air gauge with a modern and versatile display. Tolerance limits, Control limits (warnings) Calibration / Pre-set Differ...

Micro Dial Indicator | Range 0-1mm | Resolution 0.001mm

£79.60

Range 0-1mm Resolution 0.001mm 40mm dial face Adjustable dial Bezel lock Lug back fitting Tolerance pointers Fitted with ball anvil Anvil thread M2.5mm Hardened & ground racks Stem diameter: 8mm (Image not exact)

Micrometer Check Set Metric Grade 1 Steel 8 Piece with UKAS

£207.00

Set Composition :- 3.10 - 6.5 - 9.70 - 12.50 - 15.80 - 19.00 - 21.90 - 25.00mm Price includes UKAS certficate

Micrometer Check Set Steel Grade 1 Metric / Imperial 11 Pieces with UKAS

£270.00

Set Composition :- Metric:- 3.10 - 6.5 - 9.70 - 12.50 - 15.80 - 19.00 - 21.90 - 25.00 - 50.00 - 75.00 - 100.00mm. Imperial:- 0.130 - 0.250 - 0.385 - 0.500 - 0.615 - 0.750 - 0.870 - 1.000 - 2.000 - 3.000 - 4.000" Price includes UKAS certficate

Micrometer Check Set Tungsten Carbide Metric / Imperial 11 Piece with UKAS

£494.00

Set Composition Metric :- 3.10 - 6.5 - 9.70 - 12.50 - 15.80 - 19.00 - 21.90 - 25.00 - 50.00 - 75.00 - 100.00mm Imperial :- 0.130 - 0.250 - 0.385 - 0.500 - 0.615 - 0.750 - 0.870 - 1.000 - 2.000 - 3.000 - 4.000" price includes UKAS certificate single point for grade 1. 5 point for grade 0.

Micrometer Check Set Tungsten Carbide Metric / Imperial 8 Piece with UKAS

£298.00

Set Composition :- Metric:- 3.10 - 6.5 - 9.70 - 12.50 - 15.80 - 19.00 - 21.90 - 25.00mm Imperial:- 0.130 - 0.250 - 0.385 - 0.500 - 0.615 - 0.750 - 0.870 - 1.000" price includes UKAS certificate

Micrometer Inspection Set | Insize 4160 Series | 0-25mm | Grade 0 / ISO3650

£446.00

Meets ISO3650/Grade 0 One piece of optical flat is included (size Ø30x12mm) Supplied with manufacturer inspection certificate Gauge blocks included: 2.5mm, 5.1mm, 7.7mm, 10.3mm, 12.9mm, 15mm, 17.6mm, 20.2mm, 22.8mm, 25mm  Applicable micrometer 0-25mm

Micrometers 0-25mm (0.1″) 50mm or 150mm Throat

£119.00

DM4025DT50 (50mm Throat) Features: Range: 0-25mm (0.1") Resolution: 0.001mm (0.00005″) Accuracy: ±0.004mm (0.0002″) Anvil Diameter: 20mm Non-rotating spindle IP54 Sealed Protection from water, coolant & oil splashes Protected from dust ingress Ratchet drive Zero at any point mm-inch conversion Chrome plated Frame Hardened stainless steel s...

Millimar C1200 Compact Amplifier

£1,044.00

High-resolution, high-contrast color display Mains or Battery Compact, adjustable screen angle wall mount facility TFT color display, 110 mm (4.3" ), 480 x 272 pixels 8 Ranges:± 5000 / ± 2000 / ± 1000 / ± 300 / ± 100 / ± 30 / ± 10 / ± 3 8 Graduations:500 / 200 / 100 / 20 / 10 / 2 / 1 / 0,2 Single probe input Inch / metric conversion Data output ...

Mini Digital Depth Gauge with round bar - 1140 Series (Insize) | 0-25mm/0-1" | 0-50mm/0-2" | 0-100mm/0-4" | 0-150mm/0-6"

£80.00

The Insize 1140 Mini Digital depth gauge is made with a stainless steel base making the instrument strong and durable. The small lightweight gauge can be used for quick depth measurements of up to 150mm (6”) with a resolution of 0.01mm/0.0005"

Mini Digital Height Gauge 0-200mm/0-8"

£113.00

The 1146 Mini Digital Height Gage for measuring height difference of 2 surfaces. The Caliper is made of stainless steel for longer tool life and durability from machine shop wear. With optional SPC cable data output. Sizes range from 0-20mm/0-0.8". Range of 20mm/0.8". Resolution 0.01mm/0.0005". Buttons: on/off, mm/inch, zero. Made of stainless ...

Mini Digital Protractor | Range 360° (4 x 90°) | Resolution 0.01° | Repeatability 0.01° | Accuracy +- 0.3°

£50.80

Provides instant 360°digital inclination display of any angle. Embedded magnets on both sides and the bottom which make it ideal for a variety of measurements Measuring range: 360°4 x 90° Units of measurement: °% , mm/in & in/ft Resolution: .01° Repeatability: .01° Accuracy: ±.3° Voltage: 2 x 3V CR2032 Batteries

Mitutoyo 178-561-12E SJ210

£1,770.00

Measuring range: 16 mm Traverse: 17.5 mm Measuring speed: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s Measuring method: Differential inductance Range: 360 µm Stylus: Diamond Tip Skid radius: 40 mm Profiles: Roughness Profile (R), R-Motif, DF-Profile and more Roughness standard: EN ISO, VDA, JIS, ANSI and customize settings Digital filter: Gauss, 2CR75, PC75...

Mitutoyo 215-405-10 Comparator Gauge Stand Hardened Steel Anvil 110x110mm Square Anvil

£683.00

Stand Features: Effective table dimensions: 110 x 110mm Column Ø: 40 mm Max. measurement height: 235 mm Fine adjustment: 1 mm Table flatness: 0.0023 mm Stem hole ø: 9.53 mm, 8 mm with bush (standard accessory) Perpendicularity table-stem hole: 0.4/100 mm MPN: 215-405-10

Mitutoyo 293-130-10 0.0001mm Digimatic High-Accuracy Micrometer 0-25mm (0-1″)

£1,790.00

Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.0001mm (0.000005″) Accuracy: ±0.0005mm (0.00002″) Flatness:  0.0003mm (0.000012″) Parallelism: 0.0006mm (0.00002″) Measuring Surface: 3.2mm Diameter Measuring Force: 7-9N Electromagnetic induction type BS rotary sensor Battery Life: 2.4 Years Data output Inch-mm conversion Hold function Au...

Mitutoyo 293-130-10 MDH 0.0001mm Digimatic High-Accuracy Micrometer 0-25mm (0-1″)

£1,790.00

Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.0001mm (0.000005″) Accuracy: ± 0.0005mm (0.00002″) Flatness:  0.0003mm (0.000012″) Parallelism: 0.0006mm (0.00002″) Measuring Surface: 3.2mm Diameter Measuring Force: 7-9N Electromagnetic induction type BS rotary sensor Battery Life: 2.4 Years Data output Inch-mm conversion Hold function A...

Mitutoyo 293-180-30 Digimatic QuantuMike Micrometer IP65 SPC Data Output 0-25mm (0-1″)

£325.00

Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.001mm (0.00005″) Flatness: 0.0003mm (0.000012″) Parallelism: 0.001mm (0.00004″) IP65 Protected: Waterproof (coolant & dust resistant) 2mm travel per thimble rotation Carbide measuring faces, micro lap finish Ratchet thimble Battery Life: 2.4 Years SPC data...

Mitutoyo 293-348-30 Digimatic Micrometer IP65 Friction Thimble 0-25mm (0-1″)

£220.00

Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.001mm (0.00005″) Flatness:  0.0003mm (0.000012″) Parallelism: 0.001mm (0.00004″) IP65 Protected: Waterproof (coolant & dust resistant) Carbide measuring faces, micro lap finish Thimble and Sleeve scale Friction thimble Hold function Measuring Spindle: 6.35...

Mitutoyo 293-676-20 Digimatic ABSOLUTE Micrometer QuickMike 0-30mm (0-1.2″)

£486.00

Micrometer Features: Range: 0-30m (0-1.2″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.002mm (0.0001″) Flatness:  0.0003mm (0.000012″) Parallelism: 0.002mm (0.00008″) IP65 Protected: Waterproof (coolant & dust resistant) 10mm travel per thimble rotation Carbide measuring faces, micro lap finish Ratchet thimble Battery Life: 2.4 Years SPC Da...

Mitutoyo 406-350-30 Digimatic Non-Rotating Spindle Micrometer 0-25mm (0-1″)

£745.00

Micrometer Features: Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ±0.003mm (0.00015″) Flatness:  0.0003mm (0.000012″) Parallelism: 0.003mm (0.00012″) Ratchet Stop Non-rotating spindle Carbide measuring faces, micro lap finish SPC Data Output Battery Life: Approx. 2.4 years Hold function Auto Power OFF after 20 min non use Measu...

Mitutoyo 422-330-30 Digimatic 0.75mm Blade Micrometer SPC Data Output 0-25mm (0-1″)

£806.00

Range: 0-25mm (0-1″) Resolution: 0.001mm (0.00005″) Accuracy: ± 0.003mm (0.00015″) Parallelism: 0.003mm (0.00015″) Type A Ratchet stop for constant measuring force Scale: Thimble and sleeve satin chrome finish, 18mm diameter With spindle lock: 6.35 mm diameter, spindle pitch 0.635 mm SPC Data Output Hold function This Digimatic Blade Micromete...

Mitutoyo 47 Piece CERA Gauge Block Set 1-100mm

£1,930.00

These CERA gauge block sets are made from zirconia ceramic offer the highest standard of wear resistance and with the following benefits: Accuracy: Mitutoyo is accredited by the Japanese government as a calibration laboratory, meaning the gauge blocks are guaranteed for accuracy through traceability to the Metrology Management Centre of the N...